KRITZER METAL i3 3D PRINTER 250 mm X 250 mm X 250 mm
- Kritzer metal i3 3D Printer Specification
- Machine Type: Kritzer metal I3 3D Printer
- Best ambient temperature ?25°C
- Print precision 0.1 mm(minimal)
- Build size 250 X 250 X 250mm ( BuildTak print surface )
- Extruder quantity MK10 Single Extruder
- Touch Screen 2.8 ''
- Speed 10-100mm/s adjustable
- Positioning accuracy Z 0.004mm,XY 0.012mm
- Extruder diameter 0.4mm(customized 0.3mm/0.2mm)
- Recommended extruder temperature 190-260°C
- Power Supply Unit 110V or 220V,240W,50Hz, 0.89A
- Connection via USB,SD card
- Software Cura and other open source software
- Open source hardware Arduino MEGA 2560 + Ramps 1.4
- Open source firmware Marlin
- Proximity Sensor for Z axes ( 4 point )
- Accept 3D file format STL, OBJ
- Printer reading format Gcode
- Compatibility Windows XP, Windows Vista, Windows 7, Linux, Mac OX
- Unit weight 14 kg
- Material type ABS and PLA filaments
- Material specifications 1.75 mm in diameter
- 1 year waranty
Touch screen 2.8 ''
BuildTak Print Surface - The Ideal 3D Printing Surface
Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.
Filamend PLA COLORFABB 1.75mm / 0.750 KG / Standart BLACK ( include with the printer )
The absolute favorite and must have for everyone’s filament portfolio; Standard Black. By far the most popular 3d printing color in our portfolio. There’s something about black 3d prints that just make the parts look real nice. If you can’t decide on a color than you’ll always have Standard Black to rely on.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 100 mm/s
Advised Heated bed (if you have one, not strictly necessary):
Our PLA/PHA performs well on both heated and non-heated build platforms. For those users printing on a cold build platform we advise applying masking tape to the build area. The rough surface of the tape will provide enough adhesion for the first layer to stick and print almost without any warping.
Users using heated build platforms have quite a few options these days. The usual suspects are glass and aluminum build plates. For directly printing on glass or aluminum we advice user to apply glue-stick. A very thin layer will be sufficient to keep your print nicely in place. Another method is dissolving wood glue in water, you the consistency of the substance can be quite thin, a bit like milk. By applying just a few drops and smearing this out before you start heating the built plate will create a very thing layer which holds the PLA/PHA down very well. If applying this method, be careful that you don’t get your electronics wet.
Another method that works well with colorFabb PLA/PHA is polyimide tape, or Kapton tape. This tape is available as a very narrow strip or very wide strips which allow you to cover the build plate in one go. When the tape is applied correctly it can last for months.
TIP! Take your time leveling the bed and adjusting the the gap between 3d printer nozzle and build plate. A perfect first layer will is very important, especially for 3d prints with a large bottom layer. Having the nozzle set to close to the build plate will cause a pressure build up and as a result back flow in most hot ends.
TIP! PLA/PHA has very minimal warping tendencies, however if your printing parts which take up the maximum of you buildspace you might see some warping. If it’s very important that your part is perfectly flat than we suggest to turn down the fan that is cooling your part. This allows the material to slowly get rid of heat without warping. After a few centimeters you can turn on the cooling if the part needs it.
*3d printers have lots of different types of hot-end which makes it extremely difficult to give aan temperature advice. We feel our temperature advice holds for most 3d printers, but should be considered as a starting point for you to find the temperatures that work in you setup. Don’t be afraid to go either higher or lower then our advised temperatures if you feel your set-up needs this.
ince colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
Please note: The colorFabb transparent colors in the PLA/PHA range are pure PLA without the added PHA.
± 0.05 mm
Glass Transition Temperature
More information: email@example.com - Tel : 0030 - 697 607 86 47